Water the boiler to a low visible water level, then inject the molten solution into the furnace and maintain a high water level. Then light it, heat it, and bring the stove to a boil. The operation of the furnace can be divided into two modes: atmospheric pressure and pressure. During normal pressure boiling, when the boiler water boils, keep the boiler water boiling with a small fire. After the pressure in the furnace rises to 1kg / cm2, keep it for a period of time (not less than 24 hours), and then reduce the pressure. After boiling and ceasing fire, gradually drain and make up water, and the furnace temperature shall drop slowly to prevent the generation of residual stress. Only when the boiler water temperature drops to about 50 ℃, the water can be released.

在壓力下蒸煮時，應緩慢升高壓力，通常約為24小時50%的工作壓力，然後保持溫度和壓力，保持這一狀態一段時間(不少於24小時)。燃氣蒸汽鍋爐采用燃燒機下置方式，兩回程結構，燃料燃燒充分，鍋爐運行穩定而且占用空間少，同時煙管內插有擾流片，減緩排煙速度，增加換熱量，鍋爐熱效率高，降低用戶使用費用燃氣熱水鍋爐具有、、、全自動運行的顯著特點，使用起來非常方便，另外，由於運行經濟、政策鼓勵，燃氣熱水鍋爐越來越受到大家的青睞。

When cooking under pressure, slowly increase the pressure, usually about 24 hours to 50% of the working pressure, and then maintain the temperature and pressure for a period of time (not less than 24 hours). The gas-fired steam boiler adopts the lower burner and two return structure. The fuel burns fully, the boiler operates stably and occupies less space. At the same time, the smoke pipe is inserted with spoiler to slow down the smoke exhaust speed and increase the heat exchange. The boiler has high thermal efficiency and reduce the user's use cost. The gas-fired hot water boiler has the remarkable characteristics of environmental protection, energy conservation, safety and full-automatic operation, It is very convenient to use. In addition, due to the operation economy and policy encouragement, the gas-fired hot water boiler is more and more favored by everyone.

以上就是小編為大家介紹的燃氣鍋爐的除垢器的使用，希望大家能夠有所了解。

The above is the use of descaling device of gas-fired boiler introduced by Xiaobian. I hope you can understand it.